USES, APPLICATIONS:
Stonshield SLT is a seamless, free flowing flooring system engineered with a textured surface for slip resistance in commercial and industrial applications. This 3/32 to 1/8 in./2 to 3 mm flooring system provides a cost effective alternative to Stonshield HRI for light traffic applications. It is ideally suited for use in research facilities, correctional institutions, hospitals and healthcare facilities, educational facilities and a wide variety of light manufacturing areas.
SUBSTRATE:
Stonshield SLT is suitable for application over properly prepared concrete that does not require renovation. In most cases, this will be new or very smooth concrete. Not recommended over wood, brick, tile, asphalt, mastic, gypsum based products or
painted surfaces. These must first be removed by mechanical means prior to priming and overlayment.
OPTIONS:
- Cove Base: To provide for an integral seal at the joint between the floor and the wall, cove bases in heights from 2 to 6 in./5 to15 cm are available.
- Standard or Medium Texture: Stonshield Sealer is applied at a thickness that will produce the desired texture.